Element Section 7.75 Skateboard Complete - Street Ready Maple Deck For Technical Tricks

The Element Section 7.75 Skateboard Complete puts a classic 7.75 inch street deck and full hardware setup into one package so skaters can roll straight from the shop to the skatepark. Built around a 31.25 inch popsicle deck made from seven-ply maple, it targets riders who want enough board underfoot for technical tricks without feeling sluggish or bulky.

Deck Size, Shape And Construction

At the core of the Section complete is a 7.75 inch wide deck paired with a 31.25 inch length and a 14 inch wheelbase, a geometry that sits squarely in the modern street skateboard sweet spot.SkatePro lists the 7.75 inch option at 31.25 inches long with a 14 inch wheelbase and 7.75 inch axle width. The deck uses a traditional popsicle shape with a double kicktail, giving skaters raised tails at both ends for ollies, flip tricks and nollie maneuvers.The same specification sheet describes a double kicktail deck with low concave built from seven-ply Canadian maple. That seven-ply maple layup is a longstanding standard in street skating and is chosen for a mix of pop, strength and predictable flex.

The 7.75 inch width gives a middle ground between narrower boards often chosen by younger or very technical skaters and wider 8.0 inch plus decks favored for stability. On the Section complete, that width pairs with low concave, meaning the deck curvature feels subtle rather than aggressive underfoot, which can help newer riders find footing without feeling locked into deep pockets.SkatePro calls out low concave and a Canadian maple seven-ply construction with fixed deck colors. A pre-applied black grip layer means the deck is ready to ride out of the box without additional grip tape installation.

Trucks, Wheels And Bearings Setup

Under the deck, the Section 7.75 complete uses standard street hardware tuned for predictable turning and slide control. For the 7.75 inch configuration, the truck hangers are specified at 5.0 inches, matching the width of the deck so the axle spans roughly the deck edges.Model specifications list the 7.75 inch version with a 5 inch hanger and 7.75 inch axle width alongside the 14 inch wheelbase. The trucks follow a standard kingpin and standard hanger pattern, the familiar geometry many skaters learn to ride on.

Wheel choice leans toward street versatility. The Section complete in the 7.75 inch size carries small-diameter wheels around 50 mm, which help the board accelerate quickly and keep its center of gravity low for flip tricks.The specification sheet notes 50 mm diameter wheels with a 98A hardness rating on the Section complete. A 98A durometer places these wheels near the harder end of the street spectrum, offering slide-friendly behavior on smooth concrete and the crisp feel many skaters look for on ledges and rails.

Inside each wheel sit bearings rated to an ABEC-3 precision level.SkatePro lists ABEC-3 bearings in the hardware list alongside standard kingpin trucks and pre-applied grip tape. ABEC-3 bearings are commonly used in completes aimed at beginners and intermediates, trading extreme top-end speed for durability and lower cost. Hardware is rounded out with standard 7/8 inch mounting bolts that secure trucks to the deck.

Weight, Rider Capacity And Brand Context

While most skaters choose boards based on feel rather than numbers, total board weight influences how a setup spins and flips. For the Section 7.75 complete, a published weight gives a sense of heft.The SkatePro specification table lists the complete at 74.82 oz with a maximum rider weight of 220 lb. That places it in the typical range for maple street boards, light enough for repeated flip tricks but not featherweight.

Maximum rider weight figures, such as the 220 pound limit given for the Section complete, are framed to assure structural integrity rather than to assert a preferred rider profile.The same specification list pairs the 220 lb maximum with a 7.75 inch axle width and low concave deck. For many skaters, the effective takeaway is that the board is built to handle everyday street impacts and park sessions without unusual concern about strength for typical adult body weights.

Element Skateboards operates as a board brand originally founded in the United States and, more recently, tied into a larger action sports portfolio. A widely referenced overview notes that Element was acquired by Boardriders, Inc. in 2018 and locates corporate headquarters in California.An encyclopedia entry on Element Skateboards describes the company as an American skateboard brand founded in 1992, later acquired by Boardriders and associated with headquarters in Irvine, California. For US shoppers, Element boards, including the Section complete, appear across skate retailers and specialty shops rather than through a single direct outlet.

Pricing And Position Versus Other Completes

Pricing for the Element Section 7.75 complete in US dollars depends on the specific retailer and timing, but documented ranges from US-focused shopping contexts provide orientation. A listing of Element complete skateboards in a large US online marketplace environment shows the Section 7.75 complete around the upper double-digit price band among other Element completes.In a compilation of Element skateboard offerings, one entry highlights a Section Complete Skateboard 7.75 inch at $79.95 alongside other Element completes. That places the board near the center of the typical US complete skateboard price band, which often spans around $60-$130 for maple street setups with brand-name trucks and urethane wheels.

Compared with some shop-branded or closeout completes that can sit closer to $60, a mid-range price near $80 reflects the use of branded hardware and a well-known deck graphic series rather than generic parts. In the same broad assortment of completes, there are Element-branded setups at lower prices around $59.99 with smaller wheel sizes or different graphics, and higher-priced specialty completes above $100 aimed at niche graphics or premium hardware.The compiled Element skateboard search listing shows multiple prices, including $59.99 for certain Element completes and $79.95 for a Section Complete Skateboard 7.75 inch. Within that spread, the Section 7.75 complete positions itself as a mid-tier option for riders who want a recognizable deck and standard hardware without stepping into high-end pro custom builds.

How It Compares In Size And Spec

When skaters weigh the Element Section 7.75 complete against other boards, they often focus on deck width, wheel size and hardness, and concave. A 7.75 inch width, 31-31.25 inch length and 14 inch wheelbase match the geometry of many competitor completes listed by large US skate retailers, such as 7.75 inch boards from other brands advertised around the $119.95 to $129.95 range.A complete skateboards category selection from a major US skate shop shows multiple 7.75 inch completes around $119.95, placing Element in a more affordable bracket when compared against those prices. This means the Section complete may come in notably below some other branded completes while still adhering to common size standards.

Wheel hardness at 98A is slightly firmer than the many 95A to 99A wheels commonly seen on other completes, contributing to quicker slides and a crisper feel on smooth surfaces.The Section complete specification uses 98A wheels, a value that sits between the slightly softer 95A and harder 99A wheels often used for street riding. Riders who skate rough asphalt spots might feel more chatter than they would with softer wheels, but those who favor smooth park transitions or polished ledges benefit from predictable slides.

Who The Element Section 7.75 Complete Suits

With its 7.75 inch maple deck, low concave and small hard wheels, the Element Section 7.75 Skateboard Complete is tuned for street and park riders who value flip tricks, ledge work and controlled manuals. The published maximum rider weight of 220 lb, combined with the seven-ply maple and standard kingpin trucks, suits a wide range of adolescents and adults.Specifications citing a 220 lb rider limit, 50 mm wheels and double kicktail deck frame the complete as a general street and park setup rather than a cruiser or longboard. For newer skaters, starting on a 7.75 inch board can make kickflips and heelflips feel more approachable than on wider decks, while intermediate riders can keep pushing technical lines without feeling under-boarded.

Compared with wider 8.0 or 8.25 inch boards, the Section 7.75 complete sacrifices a bit of landing platform for the agility many technical street skaters prioritize. It also differs from cruiser and longboard completes through its smaller wheel diameter, harder durometer and double kicktail geometry, all of which favor ollies and skatepark tricks over relaxed transport rides. In the broader field of US-sold completes, this setup aligns with the classic street profile and occupies a mid-priced niche that offers branded deck graphics and solid maple construction without reaching the higher price tags of pro signature builds.

Placement In The Modern Skateboard Lineup

Within Element’s catalog, the Section graphic sits alongside other completes that share similar shapes but differ in artwork and minor spec tweaks. An Element listing for the Section 7.75 Multi Unisex Complete Skateboard highlights a package including Chinese maple lamination, 52 mm 99A wheels, 5.0 inch raw Element trucks with 90A white bushings, and ABEC 5 bearings, all tied together with heat-transfer bottom graphics and standard grip.The Element brand page for the Section 7.75 Multi Unisex Complete lists a width of 7.75 inches, 52 mm 99A wheels, 5.0 inch raw Element trucks and ABEC 5 bearings among its features. That configuration mirrors the core traits of the Section 7.75 complete discussed above, reinforcing its role as a go-to street package.

Material breakdown on the same Element listing gives a sense of construction beyond the main specs, with a mix of wood, stainless steel, polyurethane and paper in the overall build.The manufacturer’s details break down the build as approximately 75% wood, 15% stainless steel, 8% polyurethane and 2% paper, covering deck, hardware and packaging components. For skaters, the practical takeaway is that the deck sticks to familiar maple construction while trucks, bearings and wheels rely on established hardware materials that balance durability and response.