DeWalt DCF887D2 20V MAX XR Impact Driver Kit - Compact Power With 205 Nm Torque

DeWalt DCF887D2 20V MAX XR Impact Driver Kit targets users who want a compact, high torque driver with enough runtime for serious fastening work. The kit bundles a brushless 1/4 in, 3 speed impact driver with two 2.0Ah lithium ion batteries, a charger and a hard case, making it a complete cordless solution straight out of the box.Home Depot lists the DCF887D2 kit with two 2.0Ah batteries, charger and hard case.

Brushless Impact Driver Specs and Features

At the heart of the DeWalt DCF887D2 kit is the DCF887 brushless impact driver, an 18V XR tool that corresponds to DeWalt's 20V MAX line in the United States.DeWalt explains that 20V MAX nominal voltage is 18V. The DCF887 driver is specified for up to 205 Nm of torque, with a no load speed range of 0-1,000, 0-2,800 and 0-3,250 rpm depending on the selected mode, and impact rates up to 3,800 impacts per minute for rapid fastening.DeWalt documents 205 Nm torque, up to 3,250 rpm and 3,800 impacts per minute for the DCF887.

The tool uses a brushless motor designed to improve efficiency and extend service life while supporting a shorter overall tool length. DeWalt specifies a tool length of about 135 mm and a bare tool weight of 0.9 kg, supporting work in tighter spaces and reducing fatigue over extended use.The DCF887 is listed at 135 mm long and 0.9 kg for the bare tool. A 1/4 in hex "drop and load" bit holder allows one handed bit changes, and a triple LED light ring positioned around the chuck helps illuminate the workpiece while minimizing shadows.DeWalt highlights the drop and load bit holder and 3x LED ring on the DCF887.

Kit Components, Batteries and Warranty

DeWalt positions the DCF887D2 as a complete kit for professional and advanced DIY users who need a ready to use impact driver setup with matched batteries and storage. The kit includes two 2.0Ah XR lithium ion battery packs with state of charge indicators, a multi voltage XR charger and a TSTAK compatible kit box, alongside the driver itself, a belt hook and a magnetic bit holder.The DCF887D2 kit content listing includes two 2.0Ah XR batteries, multi voltage charger and TSTAK kit box. The 2.0Ah packs favor lighter weight and faster charging compared with higher capacity packs, which can suit users prioritizing maneuverability and shorter, repeated tasks.

On warranty, DeWalt offers a one year limited warranty and extends coverage to three years when the product is registered, covering defects due to faulty materials or workmanship under normal use conditions.DeWalt lists a 1 year limited warranty, extended to 3 years with registration, for the DCF887 series. For support in the United States, DeWalt users can access tool and product support information online and locate authorized service centers nationwide.DeWalt provides product and tool support information for US customers on its support site.

Pricing and Position Against Alternatives

In the United States, the DCF887D2 kit is positioned as a mid range professional impact driver package within DeWalt's 20V MAX XR lineup. A major home improvement retailer lists the kit with local store pricing that falls into the typical band for a premium brushless impact driver kit with two batteries, though exact prices vary by location and promotions.Home Depot lists the DCF887D2 kit and notes that local store prices apply. Users comparing the DCF887D2 to the DCF887M2 kit will find that the M2 version typically bundles higher capacity 4.0Ah batteries, trading additional runtime for more weight and cost, while sharing the same driver chassis and core specs.A marketplace overview of DCF887 kits distinguishes the DCF887D2 kit with 2.0Ah batteries from the DCF887M2 kit with 4.0Ah batteries.

From a specification standpoint, the DCF887D2's 205 Nm torque output and three speed modes compare favorably against many compact 18V class impact drivers in its segment, which often deliver lower torque figures or fewer control modes at similar price points. The combination of a compact 135 mm length, relatively low bare tool weight and LED ring lighting further differentiates the kit for users who frequently work overhead, in cabinets or in other confined spaces.A detailed specification listing for the DCF887 notes 205 Nm torque, 0-3,250 rpm and 0-3,800 impacts per minute alongside compact dimensions.

Use Cases, Limits and Who It Suits

The DeWalt DCF887D2 kit is suited to electricians, carpenters, installers and serious DIY users who need a compact impact driver capable of driving large diameter screws and structural fasteners without stepping up to heavier high torque 1/2 in impact wrenches. The 205 Nm torque rating and 3,800 ipm impact rate provide sufficient performance for framing, deck building and lag screw applications when paired with appropriate bits, while the precision drive mode in speed setting 1 offers added control for tasks such as cabinet installation or screwdriving into softer materials.DeWalt points out that the DCF887 includes a precision drive mode for screwdriving control.

Users who need extended runtime for heavy repetitive fastening, such as long structural deck screws or continuous assembly line work, may prefer pairing the DCF887 driver with higher capacity 4.0Ah or 5.0Ah battery packs instead of the 2.0Ah batteries included in the D2 kit, accepting additional weight. In turn, the DCF887D2's standard batteries keep the kit lighter to carry and easier to handle overhead. Compared with bulkier hammer drill and driver combinations, the compact length and lighter weight of this impact driver reduce strain in prolonged use, though the kit does not include a drill function and is intended primarily for driving fasteners rather than boring large holes.