Jessup The Original 3100-SB Griptape - 9 x 33 Inches

Jessup The Original 3100-SB Griptape is a black skateboard sheet measuring 9 by 33 inches. The sheet has a dark, abrasive surface that can be trimmed to the outline of a standard skateboard deck.

The format gives this model a straightforward role in a skateboard setup: one sheet covers a regular street or park deck, while the paper liner protects the pressure-sensitive adhesive before installation. Jessup lists the Original line for standard skateboards and describes the material as silicon carbide grit.

Dimensions And Grip Surface

The exact product code is 3100-SB, with the 9-by-33-inch sheet identified as 3100-9X33-SB-BX. FindTape lists a 2-mil adhesive layer, a 20-mil carrier, and a 6-mil paper release liner.

The grip layer uses silicon carbide, and the adhesive is a pressure-sensitive rubber adhesive. The listed operating range is -20 to 175 degrees Fahrenheit, a specification that describes the tape material rather than a recommended riding temperature.

Fit, Cutting, And Application

The 9-inch width suits decks around the standard street-skateboard format, while the 33-inch length provides trimming room along the nose and tail. Jessup's own guidance says common 9-by-33-inch sheets fit standard skateboard setups and can be cut to match the deck outline.

Installation requires a clean deck surface, careful alignment, firm pressure, and a sharp cutting tool for the edge. The adhesive-backed sheet is supplied as a single sheet in the retail format, so the deck preparation and trimming determine the final fit.

Price And Category Context

US retail pricing is listed at $6.99 per sheet as of 09/24/2026. A separate US industrial supplier lists the same 9-by-33-inch configuration at $5.49 per sheet, sold in multiples of two.

That pricing places the Original 3100-SB in the basic replacement-griptape segment rather than the specialty printed or extra-wide segment. Compared with Jessup's 10-by-34-inch sheet, the 9-by-33-inch version uses the narrower standard format; compared with Ultra lines, the Original uses the classic silicon carbide surface.

Who It Fits Best

Jessup The Original 3100-SB fits skateboarders replacing worn grip on a standard deck, shops preparing regular street boards, and builders who want a black sheet that can be cut to shape. Its 9-by-33-inch dimensions are the key compatibility point.

The limit is size: wider old-school decks, longboards, and unusually shaped boards can require a wider or longer sheet. The model is also a grip surface, not a deck, hardware kit, or pre-cut application.