OUTLIV Florenz Aluminum Stackable Garden Chair - Anthracite Outdoor Seat With 120 kg Load Capacity

OUTLIV Florenz Gartenstuhl stapelbar, Aluminium/Textilene, Anthrazit steps into the spotlight as a stackable garden chair designed around a powder-coated aluminum frame and a sling seat for outdoor terraces and balconies. With documented dimensions of 56x58x86 cm and a maximum load capacity of 120 kg, it offers a defined footprint and carrying strength that go beyond lightweight plastic patio chairs. A European listing places the Florenz chair at around 99.90 Euro for a single unit, positioning it among premium aluminum garden seats in its home market.

Design, Dimensions And Materials

The Florenz garden chair builds its structure around an aluminum frame combined with a Textilene seat and backrest in an anthracite color scheme. One listing describes it explicitly as an Aluminium/Textilene garden chair in Anthrazit with a size of 56x58x86 cm, making the proportions clear: approximately 56 cm width, 58 cm depth and 86 cm height. The material pairing matters because Textilene is a synthetic sling fabric often highlighted for weather resistance and UV stability, while aluminum is known for its relatively low weight and corrosion resistance when powder-coated for outdoor use.

A product description of Florenz notes that the chair is rated for a maximum load of 120 kg, giving a concrete upper weight limit for daily use. This load figure aligns with what many midrange outdoor dining chairs in metal frames offer, and it signals that the frame and joints are designed to carry adult users with a margin of safety instead of being purely decorative. The anthracite finish, applied as a powder coating on the aluminum structure, contributes to visual integration with contemporary outdoor tables and benches that often use similar dark gray tones.

Stackable Construction For Outdoor Storage

Florenz is described as a stapelbarer Gartenstuhl, meaning several chairs of the same model can be placed one on top of the other when not in use. Retail texts emphasize this stackable construction as a practical feature, framing the chair as a solution for balconies and terraces where floor space is limited. The ability to stack chairs vertically instead of leaving them spread out across the patio is a straightforward way to keep the outdoor area clear when only part of the seating is needed.

When stacked, the 56x58 cm footprint and 86 cm height interact differently with the space: instead of four separate chairs occupying four squares around a table, the same number can be placed in one column near a wall or inside a storage corner. This kind of storage behavior matters in regions with pronounced seasons, where outdoor furniture is often moved into a shed, garage or covered space during autumn and winter. A stackable design reduces the amount of storage volume needed compared with non-stackable armchairs or loungers, and it also makes moving multiple chairs at once easier because the stack behaves like a single item.

Load Capacity And Everyday Stability

The stated 120 kg load capacity provides a numerical anchor for how Florenz handles everyday seating. Load capacity figures in outdoor furniture are typically based on structural tests that simulate weight placed centrally on the seat and dynamic movements such as sitting down or standing up repeatedly. With 120 kg as the listed limit, Florenz sits in a range that covers most adult users while still leaving a safety margin compared with the average body weight in many markets.

Beyond the bare number, the combination of aluminum frame and Textilene sling influences how the chair behaves under load. Aluminum tubes and profiles used in garden seating often resist bending when properly dimensioned, and the sling seat distributes weight across a larger area instead of concentrating pressure in a small zone. This can reduce localized stress on welds and joints compared with rigid seats, which in turn may help the chair maintain its form over time. Anthracite powder coating acts as a barrier between the metal and moisture, supporting corrosion resistance in humid climates and in locations where the chair is exposed to rain or condensation.

Comparison With Other Aluminum Stackable Chairs

To place Florenz within its segment, it helps to look at other aluminum stackable garden chairs from the same brand environment. An Alpha garden chair from OUTLIV is described with a pulverbeschichtetes Aluminiumgestell, Textilene seat and teak armrests, dimensions of 62.5x67x110 cm and a listed price of around 151.09 Euro in one offer. These figures show a larger and taller chair that adds wooden armrests and positions itself at a higher price point compared with Florenz. The Alpha model still maintains a stackable design, but the added height and armrest material contribute to a different visual and physical presence on the patio.

Florenz, by contrast, concentrates on an anthracite aluminum frame and Textilene without extra wood elements, holding to its 56x58x86 cm footprint and a lower price metric around 99.90 Euro in the documented listing. This positions Florenz as the more compact and somewhat more affordable of the two while still operating within the premium aluminum sling segment. For buyers deciding between these chairs, the 62.5x67x110 cm size of Alpha may feel more generous for lounging, whereas the more modest dimensions of Florenz may integrate more easily in tighter balcony arrangements.

Use Cases, Limits And Placement In The Category

Florenz fits into the category of aluminum stackable garden chairs that prioritize a clean, powder-coated frame, a sling seat for comfort, and vertical storage capability. The anthracite color and Textilene structure align with contemporary outdoor dining sets where dark gray metal and synthetic fabrics are common. The 56x58x86 cm dimensions and the 120 kg load capacity are suitable for typical terrace and balcony scenarios, including family dining and casual seating during garden gatherings.

Limits appear when the required use case extends toward extended lounging or heavy upholstery. Florenz does not integrate a recline mechanism, deep cushioning or adjustable headrests, and its documented form stays closer to a classic dining chair profile. For users seeking full loungers or recliner chairs, other references in the OUTLIV lineup such as taller models with more pronounced backrests and integrated cushions will likely play a larger role. Within its own category, however, Florenz delivers a clear combination of aluminum frame, sling seat in Textilene, stackable construction and defined dimensions and load values that can be matched against similar chairs for a practical comparison.