Triple Eight Dual Certified MIPS Skate Helmet - Dual Safety Standards And MIPS Protection

Triple Eight Dual Certified MIPS Skate Helmet targets riders who want one helmet to cover both their bike commute and skate sessions while adding modern rotational-impact protection. With a hard ABS shell, an impact-absorbing EPS foam liner and a MIPS low-friction layer designed to reduce rotational forces from angled impacts, it aims to pack more safety tech into a familiar skate-style shape for U.S. riders.Triple Eight describes the helmet as dual certified for bike and skate, built around ABS and EPS with MIPS.

Design, Shell Construction And Safety Certifications

The Dual Certified MIPS Skate Helmet uses an all new ABS outer shell combined with an EPS liner that is re-engineered to keep a low-profile fit while meeting impact standards for both cycling and skate sports.The manufacturer specifies an ABS outer shell with EPS liner in this dual certified design. ABS, or acrylonitrile butadiene styrene, is a tough plastic commonly used in action sports helmets, chosen for its ability to spread impact forces over a broader area. The EPS foam underneath focuses on absorbing those forces, deforming in a controlled way to reduce the energy that reaches the head.

From a standards point of view, the helmet is described as complying with the U.S. CPSC Safety Standard for Bicycle Helmets for persons age 5 and older and ASTM F-1492 skate safety standards.The product listing notes compliance with U.S. CPSC bicycle helmet standards and ASTM F-1492 skate standards. CPSC 1203 covers bicycle helmet performance, including impact testing on different surfaces and retention system strength, while ASTM F-1492 focuses on skateboarding and trick skating, with repeated-impact considerations. That combination makes this model suitable for riders who split time between bikes and boards and want one helmet that meets the main U.S. benchmarks for both.

A key differentiator compared with non-MIPS versions is the added low-friction layer inside the helmet that is designed to move slightly relative to the head during an angled impact.Triple Eight explains that the helmet uses patented MIPS Technology as a low-friction layer to reduce rotational forces caused by angled impacts. The idea is to redirect some of the rotational energy away from the brain, complementing the linear-impact protection that the ABS and EPS provide.

Fit System, Sizes And Interior Padding

Instead of a dial-fit system, the Dual Certified MIPS Skate Helmet relies on sizing and pad sets to get the shell sitting correctly on the head. Triple Eight includes two sets of fit pads in the box so that riders can customize how snugly the helmet sits against the interior.The product description states that two sets of fit pads are included to customize fit. These pads are designed to be moisture-wicking and work with the helmet's sweat management approach, often branded as Sweatsaver Fit Pads on retail listings.

The manufacturer and fit guide break sizing into three main options, each defined by head circumference measured around the middle of the forehead.Triple Eight's fit guide lists Dual Certified MIPS sizes as XS/S 19.7-21.5 in (50-55 cm), S/M 21.5-22.75 in (55-58 cm) and L/XL 22.75-24 in (58-61 cm). Those ranges align with typical adult and teen head sizes, and the absence of an adjustable dial means the rider needs to choose the correct shell size based on that measurement and then fine-tune with the fit pads.

Retail listings from U.S. sellers provide slightly different lower-range values for the smallest size but reinforce the same upper bounds and overall coverage.One major U.S. retailer describes XS/S as fitting 18.9-21.25 in, S/M 21.5-22.75 in and L/XL 23.25-24 in head circumference. Across these sources, the S/M size consistently covers roughly 21.5-22.8 inches, which is a common band for adult riders who do not need either the smallest youth fit or the broadest large/extra-large shell.

Use Cases, Sports Coverage And Warranty

Triple Eight positions the Dual Certified MIPS Skate Helmet as a multi-sport piece of protective gear rather than a single-discipline racing helmet. The manufacturer and retail pages list biking, skateboarding, inline skating or rollerblading, roller derby, scooters and commuting among its core uses.Triple Eight highlights biking, skateboarding, inline skating, rollerblading, derby and scooters as suitable activitiesA U.S. retail listing adds BMX, roller derby and commuting to the recommended activities. That makes the helmet particularly relevant for riders who split their time between different wheeled sports but want the familiarity of a skate-style silhouette instead of a more elongated road bike shell.

The helmet includes an adjustable chin strap with a side-release buckle, which is standard on action sports helmets and allows the user to set a snug but comfortable fit under the jaw.Retailers describe an adjustable chin strap with side-release buckle and removable Sweatsaver Fit Pads. Sweat management is supported through those removable fit pads, which are designed to wick moisture and can be swapped out or washed as needed. A manufacturer warranty of 180 days is cited on several retail pages, offering half a year of coverage against manufacturing defects.One listing notes a 180-day manufacturer warranty for this helmet.

Comparison With Gotham Dual Certified MIPS Helmet

Within Triple Eight's lineup, the Gotham Dual Certified MIPS Helmet provides an alternative for riders who prefer a more urban-styled shell with slightly different sizing and styling cues.Triple Eight describes the Gotham Dual Certified MIPS Helmet as an urban styled option with MIPS technology. The Gotham variant uses the same overall safety concept of an ABS shell, EPS foam liner and MIPS layer, and it also complies with U.S. CPSC bicycle standards for age 5 and older alongside ASTM F-1492 skate standards.

The sizing bands differ slightly between the two models, which can influence which helmet works better for a given head shape. For the Gotham MIPS, Triple Eight lists XS/S as covering 18.9-21.3 inches, S/M 21.7-22.8 inches and L/XL 23.2-24 inches in head circumference.The Gotham MIPS sizing chart shows XS/S 18.9-21.3 in, S/M 21.7-22.8 in and L/XL 23.2-24 in. Compared with the Dual Certified MIPS Skate Helmet's XS/S 19.7-21.5 inches and S/M 21.5-22.75 inches, the Gotham offers a slightly lower minimum on the smallest size and marginally higher upper bounds on the S/M and L/XL ranges. Riders who find themselves between sizes on the Dual Certified MIPS Skate Helmet might find the Gotham shell a better match.

Styling also separates the two. The Gotham emphasizes an urban aesthetic and is frequently marketed for e-bike, longboard and city riding, whereas the Dual Certified MIPS Skate Helmet holds closer to the classic, rounded skate shape that skaters and BMX riders recognize.The Gotham MIPS product description mentions use for biking, skateboarding, inline skating, roller derby, e-bike, longboard and e-skateboard. For riders mainly hitting skateparks and street spots, the Dual Certified MIPS Skate Helmet keeps that skatepark-ready outline while still locking in the same dual certification and rotational-impact technology.

Pricing, Value And Who It Suits

U.S. retail listings place the Triple Eight Dual Certified MIPS Skate Helmet in a mid-range price band for multi-sport helmets with additional impact technology. For example, a major retailer lists color and size combinations of this helmet around typical branded skate and bike helmet prices, supported by the ABS shell, EPS liner, MIPS layer and included fit pads.A U.S. retailer presents the Dual Certified MIPS Bike and Skateboard Helmet with ABS shell, EPS liner, MIPS layer and fit pads at a typical branded price point. When weighing value, the comparison to non-MIPS dual certified helmets matters because MIPS-equipped versions typically cost more than basic models using only a shell and EPS liner.

In that context, riders who spend most of their time in urban environments or at skateparks and want recognized U.S. certifications plus rotational-impact mitigation may find the Dual Certified MIPS Skate Helmet a practical choice. It suits cyclists, skateboarders, inline skaters, scooter riders and roller derby participants who prioritize a compact skate-inspired profile over the more elongated road or mountain bike shapes. By combining CPSC and ASTM F-1492 compliance with MIPS technology, ABS construction and EPS impact absorption, the helmet positions itself as a versatile piece of protective equipment rather than a niche racing shell.